BRETTRAGER MANUFACTURING

Brettrager Manufacturing was originally started by Henry Brettrager. In 1994, Lumco Manufacturing Company bought the engineering and rights to produce Brettrager machines. Brettrager Machine built many machines in the years of existence.

Here is a list of some of the machines built or rebuilt by Brettrager:

• 21 inch Cam Loader
• 2BHRDT machines
• 36 inch Loader
• 400 Tracer
• 56 inch Loader
• Back Lash Eliminator
• BOL 75
• Ch-4 Centerdrive Type Lathe
• Crankpin Lathe Rebuild
• Crankshaft Loaders
• CT Lathe
• Cut-off and Grind
• Double Loaders
• Eascot Machines - Picture One, Picture Two, Picture Three and Picture Four
• Eascot A & A100
• Eascot B
• EDM 2-BOL-410
• Gantry #2 and #3 Machines
• Gateway Machines
• Gemini III
• Leblond Lathes
• Model 100 - Porcelain Tracer Lathe
• Model 101 -28 x 180 Vertical Tracer Lathe
• Model 102 - 20 x 84 Horizontal Tracer Lathe
• Model 103 - 32 x 100 Horizontal Tracer Lathe
• Model 150 - 18 x 60 Taper Boring Machine
• Model 151 - Boring Machine
• Model 160 - Vertical Taper Boring Machine
• Model 162
• Model 262
• Model 400 - Dual Spindle Tracer Lathe
• Model 401 - Dual Spindle Tracer Lathe
• Model 402 - Tracer Lathe
• Model 404 - Four Spindle Horizontal Lathe
• Model 500 - Vertical Turning Lathe
• Model 501 - Porcelain Matic Insulator Turning Machine
• Model 502 - Two Spindle Vertical Lathe
• Model 504 - Four Spindle Vertical Lathe
• Model 600 - Dual Spindle Boring Machine
• Model 602
• Model 604 - Double End Facing Machine
• Model 700 - 30 x 192 Cut-off Grind Machine
• Model 701 - 27 x 150 Cut-off Grind Machine
• Model B
• Model SCD & DF-2
• MP-4 Lathe
• SS-10 Lathes
• SS10-A Pin Lathe
• Sunstrand Lathe
• TFM-24
• TFM-36
• Timing Ring Lathe
• Wickes Center Drive
• Wickes Center Lathe
• Wickes CH-4 Lathe
• Wickes MX-4

HOME | ABOUT US | MACHINES | TOOLING | SPECIALLY DESIGNED TOOLING | GAGES | BALLNOSE TOOLING | BRETTRAGER MANUFACTURING | BROACHES | FIXTURES | I.D. SCRAP CHOPPER